JRH Construction installs aluminum metal roofing on Dallas homes across Lakewood, Preston Hollow, Lake Highlands, and surrounding Dallas County neighborhoods. Aluminum Metal panels from Englert and Classic Metal Roofs deliver a 50+ years service life, 40-year paint warranty plus lifetime substrate warranty, and Class 4 available with reinforced aluminum alloys, at $15 to $21 per square foot installed for full tear-off and installation. JRH carries GAF Master Elite certification, $10 million-plus in bonding capacity, and SAM.gov federal registration.
Why Dallas Homeowners Choose Aluminum Metal Over Shingles
Dallas homeowners in neighborhoods served by Dallas ISD and the Uptown/Deep Ellum commercial core face a mix of century-old bungalows and 2000s in-fill construction, each with different deck substrates and flashing requirements. Aluminum Metal metal roofing will never rust, even in prolonged moisture exposure or salt-air edge cases, and in Dallas specifically the material answers three homeowner concerns at once: hail survivability, HOA architectural fit, and long-run insurance cost.
Dallas took direct hits from the May 28 2019 EF-3 tornado through Preston Hollow and the June 2 2023 derecho with 70-plus mph winds across the I-635 corridor. Every one of those events pushed Dallas County shingle claims past the policy deductible and produced visible granule loss, bruised mats, and dented metal flashings on homes across Lakewood and Preston Hollow. Aluminum Metal panels rated to Class 4 available with reinforced aluminum alloys absorb the same impact energy without cracking the substrate or voiding the warranty.
Dallas County hail claims paid out above $1.1 billion across the 2023 and 2024 storm seasons according to the Texas Department of Insurance, and State Farm, Allstate, Farmers, and USAA all accept Class 4 metal discounts on Dallas properties. That turns a Aluminum Metal re-roof from a one-time capital expense into a 10-to-30-year insurance-offset — the premium reduction alone typically pays back 20 to 40 percent of the installed cost across the service life.
Dallas Neighborhoods JRH Serves for Aluminum Metal Installation
•Lakewood
•Preston Hollow
•Lake Highlands
•Kessler Park
•Casa Linda
Primary ZIP codes: 75214, 75218, 75220, 75225, 75229, 75238. JRH also handles estate-grade and HOA-controlled aluminum metal projects in the greater Dallas County service area.
Aluminum Metal Specifications for Dallas Installations
JRH Construction specifies aluminum metal on Dallas projects using the following baseline technical parameters. Final specification varies by Dallas HOA constraints, existing deck condition, and homeowner color and profile selection.
Installed Cost
$15 to $21 per square foot installed
Manufacturer Warranty
40-year paint warranty plus lifetime substrate warranty
Expected Lifespan
50+ years
Wind Rating
ASTM E1592 wind uplift rated to 130 mph on 0.032-inch aluminum
Impact Rating
Class 4 available with reinforced aluminum alloys
Manufacturers JRH Installs
Englert, Classic Metal Roofs, Atas International, Berridge
Best-Fit Homes
coastal-climate homes, homes with heavy tree-leaf or pollen exposure, and architectural preservation projects
Aluminum weighs roughly 0.7 pounds per square foot — the lightest metal roofing substrate JRH installs — and carries a thermal expansion coefficient of 13 ppm per degree F, meaning clip spacing on DFW installs accounts for roughly 5/8-inch movement per 20-foot panel across summer-to-winter temperature swings.
HOA Approval and Dallas Permit Process
Conservation districts in Kessler Park and Winnetka Heights limit exterior material changes; JRH files the required certificate-of-appropriateness paperwork with the City of Dallas Landmark Commission before the first panel ships. JRH Construction submits the HOA package with the contract and tracks approval status weekly until the committee signs off.
Dallas roofing permits pull through the city building department portal, and JRH handles the application, inspection scheduling, and close-out documentation on every aluminum metal installation. A typical Dallas re-roof mixes 1920s-to-1940s pier-and-beam homes in East Dallas with 1990s-to-2010s slab-foundation custom builds in North Dallas, which means permit and inspection workflow varies slightly by neighborhood; JRH carries the current Dallas code reference sheet on every crew vehicle.
How much does aluminum metal roofing cost in Dallas, TX?
Aluminum Metal metal roofing in Dallas typically runs $15 to $21 per square foot installed for full tear-off and installation as of Q2 2026. JRH Construction pricing on a representative Dallas home — roughly 2,800 to 4,800 square feet of roof area — lands in that range depending on pitch complexity, the number of penetrations, and whether the existing deck requires replacement. Insurance carriers including State Farm, USAA, Allstate, and Farmers recognize Class 4 available with reinforced aluminum alloys for premium reductions on Dallas policies.
Is aluminum metal the best metal roofing choice for a Dallas home?
Aluminum Metal is the correct specification in Dallas when the homeowner needs coastal-climate homes, homes with heavy tree-leaf or pollen exposure, and architectural preservation projects. Aluminum weighs roughly 0.7 pounds per square foot — the lightest metal roofing substrate JRH installs — and carries a thermal expansion coefficient of 13 ppm per degree F, meaning clip spacing on DFW installs accounts for roughly 5/8-inch movement per 20-foot panel across summer-to-winter temperature swings. Dallas homeowners in neighborhoods served by Dallas ISD and the Uptown/Deep Ellum commercial core face a mix of century-old bungalows and 2000s in-fill construction, each with different deck substrates and flashing requirements, so the right metal system varies house by house. JRH Construction provides a free Dallas on-site assessment that measures pitch, framing capacity, attic ventilation, and HOA constraints before recommending a specific aluminum metal roofing SKU.
Do Dallas HOAs allow aluminum metal roofs?
Most Dallas HOAs approve aluminum metal metal roofing when the submitted profile and color match the community’s architectural standards. Conservation districts in Kessler Park and Winnetka Heights limit exterior material changes; JRH files the required certificate-of-appropriateness paperwork with the City of Dallas Landmark Commission before the first panel ships. JRH Construction prepares the complete HOA package — material samples, color chips, rendered elevations, and manufacturer data sheets from Englert and Classic Metal Roofs — for every Dallas metal roof project.
How long does aluminum metal metal roofing last in the Dallas climate?
Aluminum Metal carries a 50+ years expected service life in North Texas, and the manufacturer warranty runs 40-year paint warranty plus lifetime substrate warranty. Dallas took direct hits from the May 28 2019 EF-3 tornado through Preston Hollow and the June 2 2023 derecho with 70-plus mph winds across the I-635 corridor, and aluminum metal roofing installed by JRH Construction survives those events with the ASTM E1592 wind uplift rated to 130 mph on 0.032-inch aluminum rating. Periodic fastener inspection every 5 to 7 years keeps the system inside its warranty window.
Will my Dallas insurance carrier give a discount for a Class 4 metal roof?
Dallas County hail claims paid out above $1.1 billion across the 2023 and 2024 storm seasons according to the Texas Department of Insurance, and State Farm, Allstate, Farmers, and USAA all accept Class 4 metal discounts on Dallas properties. JRH Construction documents the Class 4 available with reinforced aluminum alloys rating on every Dallas installation and issues a Texas Department of Insurance-recognized completion certificate that homeowners submit directly to the carrier for premium reduction processing.
How long does a full aluminum metal re-roof take on a Dallas home?
A full tear-off and aluminum metal roofing installation on a typical Dallas home — A typical Dallas re-roof mixes 1920s-to-1940s pier-and-beam homes in East Dallas with 1990s-to-2010s slab-foundation custom builds in North Dallas — takes 5 to 8 working days. JRH crews tear off the existing roof in one day, install underlayment and drip edge in one to two days, run panel and flashing installation across three to five days, and complete trim, ridge, and final cleanup on the last day. Weather days extend the schedule but do not add labor cost.
What warranty does aluminum metal carry versus asphalt shingles?
Aluminum Metal carries a 40-year paint warranty plus lifetime substrate warranty, compared with 25 to 50-year limited warranties on architectural asphalt shingles — but shingle warranties rarely survive the first major Collin County or Tarrant County hail event, while aluminum metal roofing installed by JRH holds up across multiple storm cycles without claim activity. Englert, Classic Metal Roofs, Atas International all offer transferable warranty registration that increases Dallas home resale value by 1 to 6 percent per Remodeling Magazine Cost vs Value data.
Free Dallas Aluminum Metal Roof Quote
JRH Construction delivers a written aluminum metal specification, itemized budget, and HOA submission package within 5 business days of an on-site assessment. No cost, no obligation.
