JRH Construction

Stone-Coated Steel Metal Roofing

Stone-Coated Steel Roofing in Colleyville, TX

JRH Construction installs stone-coated steel metal roofing on Colleyville homes across Whittier Heights, The Highlands, Riverwalk, and surrounding Tarrant County neighborhoods. Stone-Coated Steel panels from Decra and Boral Steel deliver a 50 to 70 years service life, 50-year limited manufacturer warranty, and Class 4 impact — the maximum impact grade on the UL 2218 scale, at $14 to $19 per square foot installed for full tear-off and installation. JRH carries GAF Master Elite certification, $10 million-plus in bonding capacity, and SAM.gov federal registration.

  • GAF Master Elite (top 2%)
  • BBB A+ accredited since 2019
  • 25+ years in business
  • 4.9★ (172 reviews)
  • 600+ projects completed

Why Colleyville Homeowners Choose Stone-Coated Steel Over Shingles

Colleyville sits at the center of the Grapevine-Colleyville ISD footprint with home values averaging well above the DFW median per Tarrant Appraisal District data; the city enforces tight permit and inspection protocols on roof replacement. Stone-Coated Steel metal roofing delivers the profile of concrete tile at roughly half the structural load, and in Colleyville specifically the material answers three homeowner concerns at once: hail survivability, HOA architectural fit, and long-run insurance cost.

Colleyville absorbed the April 26 2024 severe storm event with wind-driven hail and the March 24 2023 complex that produced documented damage across Whittier Heights. Every one of those events pushed Tarrant County shingle claims past the policy deductible and produced visible granule loss, bruised mats, and dented metal flashings on homes across Whittier Heights and The Highlands. Stone-Coated Steel panels rated to Class 4 impact — the maximum impact grade on the UL 2218 scale absorb the same impact energy without cracking the substrate or voiding the warranty.

Colleyville homeowners insure through a mix of State Farm, Chubb, PURE, and Liberty Mutual given the elevated home values, and documented Class 4 impact-rated metal produces premium credits across all of them. That turns a Stone-Coated Steel re-roof from a one-time capital expense into a 10-to-30-year insurance-offset — the premium reduction alone typically pays back 20 to 40 percent of the installed cost across the service life.

Colleyville Neighborhoods JRH Serves for Stone-Coated Steel Installation

  • Whittier Heights
  • The Highlands
  • Riverwalk
  • Bransford Estates
  • Hall-Johnson

Primary ZIP codes: 76034. JRH also handles estate-grade and HOA-controlled stone-coated steel projects in the greater Tarrant County service area.

Stone-Coated Steel Specifications for Colleyville Installations

JRH Construction specifies stone-coated steel on Colleyville projects using the following baseline technical parameters. Final specification varies by Colleyville HOA constraints, existing deck condition, and homeowner color and profile selection.

Installed Cost$14 to $19 per square foot installed
Manufacturer Warranty50-year limited manufacturer warranty
Expected Lifespan50 to 70 years
Wind RatingUL 2218 Class 4 impact + ASTM E1592 wind uplift rated to 120 mph
Impact RatingClass 4 impact — the maximum impact grade on the UL 2218 scale
Manufacturers JRH InstallsDecra, Boral Steel, Roser, Gerard
Best-Fit Homessteep-pitch architectural homes where HOA rules require a tile or shake silhouette

Stone-coated steel panels weigh roughly 1.4 pounds per square foot — about one-fifth the load of clay tile — so existing framing typically requires no structural reinforcement during a tear-off conversion.

HOA Approval and Colleyville Permit Process

Colleyville estate neighborhoods including Whittier Heights, The Highlands, and Riverwalk each run architectural review committees with prescribed metal profile options; JRH submits every Colleyville application with pre-approved SKUs. JRH Construction submits the HOA package with the contract and tracks approval status weekly until the committee signs off.

Colleyville roofing permits pull through the city building department portal, and JRH handles the application, inspection scheduling, and close-out documentation on every stone-coated steel installation. Colleyville roofs sit primarily on 1990s-to-2010 estate-grade custom builds in the 4,000-to-8,000 square foot range with steep architectural pitches, which means permit and inspection workflow varies slightly by neighborhood; JRH carries the current Colleyville code reference sheet on every crew vehicle.

Related JRH Pages

Stone-Coated Steel Roofing FAQ — Colleyville, TX

How much does stone-coated steel roofing cost in Colleyville, TX?

Stone-Coated Steel metal roofing in Colleyville typically runs $14 to $19 per square foot installed for full tear-off and installation as of Q2 2026. JRH Construction pricing on a representative Colleyville home — roughly 2,800 to 4,800 square feet of roof area — lands in that range depending on pitch complexity, the number of penetrations, and whether the existing deck requires replacement. Insurance carriers including State Farm, USAA, Allstate, and Farmers recognize Class 4 impact — the maximum impact grade on the UL 2218 scale for premium reductions on Colleyville policies.

Is stone-coated steel the best metal roofing choice for a Colleyville home?

Stone-Coated Steel is the correct specification in Colleyville when the homeowner needs steep-pitch architectural homes where HOA rules require a tile or shake silhouette. Stone-coated steel panels weigh roughly 1.4 pounds per square foot — about one-fifth the load of clay tile — so existing framing typically requires no structural reinforcement during a tear-off conversion. Colleyville sits at the center of the Grapevine-Colleyville ISD footprint with home values averaging well above the DFW median per Tarrant Appraisal District data; the city enforces tight permit and inspection protocols on roof replacement, so the right metal system varies house by house. JRH Construction provides a free Colleyville on-site assessment that measures pitch, framing capacity, attic ventilation, and HOA constraints before recommending a specific stone-coated steel metal roofing SKU.

Do Colleyville HOAs allow stone-coated steel roofs?

Most Colleyville HOAs approve stone-coated steel metal roofing when the submitted profile and color match the community’s architectural standards. Colleyville estate neighborhoods including Whittier Heights, The Highlands, and Riverwalk each run architectural review committees with prescribed metal profile options; JRH submits every Colleyville application with pre-approved SKUs. JRH Construction prepares the complete HOA package — material samples, color chips, rendered elevations, and manufacturer data sheets from Decra and Boral Steel — for every Colleyville metal roof project.

How long does stone-coated steel metal roofing last in the Colleyville climate?

Stone-Coated Steel carries a 50 to 70 years expected service life in North Texas, and the manufacturer warranty runs 50-year limited manufacturer warranty. Colleyville absorbed the April 26 2024 severe storm event with wind-driven hail and the March 24 2023 complex that produced documented damage across Whittier Heights, and stone-coated steel metal roofing installed by JRH Construction survives those events with the UL 2218 Class 4 impact + ASTM E1592 wind uplift rated to 120 mph rating. Periodic fastener inspection every 5 to 7 years keeps the system inside its warranty window.

Will my Colleyville insurance carrier give a discount for a Class 4 metal roof?

Colleyville homeowners insure through a mix of State Farm, Chubb, PURE, and Liberty Mutual given the elevated home values, and documented Class 4 impact-rated metal produces premium credits across all of them. JRH Construction documents the Class 4 impact — the maximum impact grade on the UL 2218 scale rating on every Colleyville installation and issues a Texas Department of Insurance-recognized completion certificate that homeowners submit directly to the carrier for premium reduction processing.

How long does a full stone-coated steel re-roof take on a Colleyville home?

A full tear-off and stone-coated steel metal roofing installation on a typical Colleyville home — Colleyville roofs sit primarily on 1990s-to-2010 estate-grade custom builds in the 4,000-to-8,000 square foot range with steep architectural pitches — takes 5 to 8 working days. JRH crews tear off the existing roof in one day, install underlayment and drip edge in one to two days, run panel and flashing installation across three to five days, and complete trim, ridge, and final cleanup on the last day. Weather days extend the schedule but do not add labor cost.

What warranty does stone-coated steel carry versus asphalt shingles?

Stone-Coated Steel carries a 50-year limited manufacturer warranty, compared with 25 to 50-year limited warranties on architectural asphalt shingles — but shingle warranties rarely survive the first major Collin County or Tarrant County hail event, while stone-coated steel metal roofing installed by JRH holds up across multiple storm cycles without claim activity. Decra, Boral Steel, Roser all offer transferable warranty registration that increases Colleyville home resale value by 1 to 6 percent per Remodeling Magazine Cost vs Value data.

Free Colleyville Stone-Coated Steel Roof Quote

JRH Construction delivers a written stone-coated steel specification, itemized budget, and HOA submission package within 5 business days of an on-site assessment. No cost, no obligation.